Refrigerator Repair in Arlington — Book a Visit Today

Milk turning early? Ice cream soft? A warm fridge moves fast from annoying to expensive. Common causes are a frosted-over evaporator coil, a fan motor that quit, or a defrost thermostat stuck open. We check the temps, listen for the compressor, and pull the back panel to see the real story. Arlington kitchens are often tight, so we bring floor protection and move carefully around door swings and cabinet fronts. Built-ins and side-by-sides included, all major brands, independent service. Call us with the model number handy, or use the quote form.

Real person answers
Open 7 days
Written quotes

Call (888) 826-9217

A real person answers
Open 7 days
Written quote before work starts

Taking calls until 5:00 PM ET

Refrigerator Repair technician in Arlington, VA

Common refrigerator faults in Arlington homes

Freezer's fine but the fridge side is warm Blocked damper, iced evaporator, or a dead circulation fan
There's water pooling under the crisper drawers Clogged defrost drain tube or a split water line fitting
It runs constantly and never shuts off Dirty condenser coils, bad door gasket seal, or failing thermostat
Ice maker fills but the cubes come out hollow Low water pressure, partially frozen inlet valve, or fill tube icing
Loud buzzing then silence, over and over Compressor start relay or overload protector cycling out

Arlington coverage

We cover Arlington from 22201, 22202, 22204 and 22207, plus nearby Baileys Crossroads, McLean, West Falls Church and Alexandria.

Other repairs we do in Arlington

All refrigerator repair → · All Arlington services →

Refrigerator Repair in Arlington — quick answers

How cold should my refrigerator actually be?

Aim for 37 to 40 degrees in the fresh food side and around 0 in the freezer. Use a standalone thermometer in a glass of water overnight — built-in displays drift and often read what the board thinks, not what the air is.

My fridge is fifteen years old. Worth fixing?

Depends on what broke. A fan motor, thermostat, or defrost heater on a solid cabinet is usually sensible. A failed sealed system on an aging unit is a different conversation. We'll tell you honestly which one you're looking at.

Why is there ice building up on the back wall of the freezer?

That's the defrost cycle failing. The heater, thermostat, or timer stopped clearing frost from the evaporator, so it grows into a block and strangles airflow to the fridge side. Common repair, and the parts are usually available.

Can you work on built-in and counter-depth units?

Yes. Built-ins need care coming out of their cabinets and often have condensers up top instead of below. We plan the pull before we start so nothing gouges your flooring or cabinet trim.

How soon can you get to my Arlington place?

Most calls get a same-week window, and often next-day. Give us the appliance, the brand, and what it's doing wrong. If you're in a building with a loading dock or garage access rules, mention that — it saves the tech ten minutes at the door.

How it works

Step 1
Tell us the symptom
Call us or fill out the form. Describe what you hear, smell or see. Brand and rough age help. We ask a few questions so the tech arrives with likely parts on the truck.
Step 2
We come look
Pick a window that works. Our tech tests the machine, checks power, water and drainage, then explains what failed in plain words. No jargon, no guessing out loud at your kitchen table.
Step 3
Repair or straight answer
Most jobs finish the same visit. If a part must be ordered, we tell you what and why. If the unit isn't worth fixing, we say that too, and you decide.

Call (888) 826-9217

A real person answers
Open 7 days
Written quote before work starts

Questions worth asking any repair company

Ask these of anyone you let into your home — us included. Call and we'll answer all five before you book anything.

1Ask for their license numberThen verify it with your state licensing board rather than taking it on trust.
2Ask for proof of insuranceLiability cover protects you if something goes wrong in your home.
3Get the quote in writingIncluding the trip fee, whether it's credited against the repair, and parts.
4Ask how they handle callbacksIf the same fault returns, what happens? Get the answer before work begins.
5Check their own reviewsLook the business up independently — their Google profile, not just what they tell you.

Why homeowners call us

Old houses don't scare usRowhouse kitchens, narrow cellar stairs, stacked units jammed in closets. We've pulled machines through doorways built before these appliances existed. We protect floors and trim, and we put everything back where it stood.
Symptom-first diagnosisA dryer that runs cold and a dryer that trips the breaker are different problems. We test before we replace. That keeps us from swapping good parts and handing you a bill for nothing.
Independent, not a brand agentWe repair all major brands but answer to no manufacturer. That means we recommend the fix that makes sense for your machine and your budget, including telling you when replacement is the smarter move.
Wide service map, local habitsFourteen Northeastern states, dispatched with Connecticut manners. We call before we arrive, wear covers indoors, and clean up the water, lint and packaging before we head out the door.
All major brands, gas & electricWhirlpool, Samsung, LG, GE, Maytag, Bosch, KitchenAid and more — as an independent repair company.
Straight answersIf it isn't worth repairing, we'll say so — often on the phone.